Full Members
  • Content count

  • Joined

  • Last visited

About ashworth15

  • Rank
    New Member

Previous Fields

  • Model of Volvo
    V50 (Estate)
  • Location (County)
  1. To be honest i cant quite remember he speaks 100 miles an hour too so it makes it hard [emoji23]. I asked him if the seals would have any effect on the matter and he seems to think not? Here are the codes and descriptions... 2350-injection valve of cylinder 5/faulty signal 2430-fuel system/faulty signal 2320-injection valve of cylinder 2/faulty signal. Sent from my iPhone using Tapatalk
  2. Hopefully you can see these. Sent from my iPhone using Tapatalk
  3. He just took the thing out. He said because there was corrosion on the heat sink side that there maybe water inside the boards? I thought it was a drastic move from putting the new seals on. I have spoken to the previous owner he said he had it serviced every october. He said the fuel filter had been replaced last year. Cant remember the codes now il try and ask him for the screenshot however i remember there being 3 codes. 2 of them were for injectors 3 and 5 i think. Give me a moment and i shall ask him for it. Sent from my iPhone using Tapatalk
  4. Update. Seals have been replaced however it still coughs then cuts out. He has taken the ecu out now and is sending it off for testing. Are the d5 ecu's prone to problems?? My dads has never had a problem at all Sent from my iPhone using Tapatalk
  5. Awesome. He is fitting the new seals tomorrow. If that doesnt work then he knows a guy who has special volvo diagnostics so il root for him. Just baffles me why he hadnt renewed them and this guy works on all our works trucks! Nothing coming up on my Bluetooth dongle either Sent from my iPhone using Tapatalk
  6. Meant to add. He hadnt renewed the seals when he stuck them back on Sent from my iPhone using Tapatalk
  7. Hi forgive me if this has been mentioned before i have seen a few posts regarding this issue but nothing seems to be specific to how mine is behaving. So here goes i hope you can help me... I bought the 2008 v50 d5 last month with 104k miles. Drove it from Birmingham to Chester no problems at all. However the car lacked power and this was down to the swirl flaps not opening correctly( it didnt pin you down as such as a d5 should!). Flaps were changed. All was good for a while. Then it cut out on me for the first time. I open ed the bonnet and could hear an injector hissing. Rang our mechanic and he said he hadnt renewed the seals on them just used the old ones (daft i know). I managed to get it started again and off i went. It has done this twice since and its frustrating me. Upon restarting and after some steady revs it hesitates and conks out again. The only trend i have noticed is when i stick the a/c or heated seats on and cd then it hesitates after a short while. The only other problem i can think is the injectors losing pressure because of the knackered seals? Any help would be appreciated thank you. Sent from my iPhone using Tapatalk