New member to the clan
#1
Posted 15 January 2012 - 09:15
I have just found this forum (where have I been) whilst searching through the web.
I have just changed my V50 D5 R-design (58) for V60 D5 Geartronic R-Design Polestar and thought I would join the T5D5 clan.
Looking forward to chattin with fellow memebers.
I will attempt to upload a photo of the new car as soon as I can figure out how too!!
Regards,
KelvinV60
#2
Posted 15 January 2012 - 09:40

MY05 S60R 33K, 17" Pegs with spare, Bluetooth, Phone, Digital Jukebox, IPOD, TV, NAV, Sunblinds, Moonroof, RSE System, plus the normal R refinements!
MODS: MTE Stage 2 with revised boost map, new injectors, Feritta cat back, 3" DP with 200CPI magnaflow CAT, Carbon Fibre door mounted prosport boost gauge, Goodyear vac and brake hoses!
Plans: FMIC, Digital TV, Reverse Cam, Block shim
.
#3
Posted 15 January 2012 - 11:17
Easiest way for pics is to open a photobucket account, upload your pics to that account/site and post the links here.

Don't let your age define you. It's a number, that's all.
Nasty D5 dieseasel with few twiddly bits from TWR, MTE, IPD and Eibach but 600 miles to a tank ain't to be sniffed at :-)
tonyt-5 said:
#5
Posted 15 January 2012 - 19:08





fully rebuilt 850r auto engine with 82k on it K24 Turbo,Custom 3" Turbo Inlet Pipe,Ported Me7 Manifold,Triple Layer Exhaust Manifold Gasket,3" Angled Flange Downpipe,flowed head,70mm throttle body,Sports Cat,3" Cat Back with heat wrap,M56 Gearbox with internal slave and gripper diff,apexi Air filter,BSR shield,THS rods,MTE stage 2 remap,Strut Brace,RIP Kit,Polly Top Mount,poly bush bottom arms,vxr Injectors,walbro fuel pump,uprated intercooler ,innovate wideband, WP 6 pot calipers,336mm discs skimmed to take 50mm carbone lorraine RC6 pads,17 inch peg reps,front and rear anti roll bars koni yellow (rear) fk's (front)
was running 304bhp @ just under 1bar of boost so what will it be at ????bhp and 1.4-1.5 bar of boost :-)
#6
Posted 20 January 2012 - 17:57
#7
Posted 20 January 2012 - 20:14
#8
Posted 22 January 2012 - 08:16
Thanks for the tip RobbieH, let's hope this works!
Dream3r here goes: http://s1173.photobu...0Geartronic.jpg
#9
Posted 22 January 2012 - 10:22

Chucked IMG tags on so it just displays on the page.
Edited by GazT4R, 22 January 2012 - 10:23 .

'The greatest British inventions were built by men with flat caps in sheds' - James May
The Rica maps for the KKK cars is about the same as drilling a hole in the TCV to actuator hose but a lot more expensive. - Tim Williams
#10
Posted 22 January 2012 - 10:37
#11
Posted 24 January 2012 - 19:54
Thanks guys!
GazT4R - when you say chucked tags on? Is this done on the photobucket site?
#12
Posted 24 January 2012 - 21:16
#13
Posted 25 January 2012 - 09:22
KelvinsullivanV60, on 24 January 2012 - 19:54 , said:
On Photobucket if you copy the box called IMG code under the photo when your in the album it has the tags in it already.
You can add them manually as I did with yours but that's the easiest way to do it.

'The greatest British inventions were built by men with flat caps in sheds' - James May
The Rica maps for the KKK cars is about the same as drilling a hole in the TCV to actuator hose but a lot more expensive. - Tim Williams
#14
Posted 25 January 2012 - 09:23

'The greatest British inventions were built by men with flat caps in sheds' - James May
The Rica maps for the KKK cars is about the same as drilling a hole in the TCV to actuator hose but a lot more expensive. - Tim Williams
#15
Posted 25 January 2012 - 15:50
1995 855 R ( Wifes )
1698 Hillman Imp Californian ( My Toy )
#16
Posted 25 January 2012 - 19:29
Hammerite works really well on calipers, on rough castings you can paint it on and you'll never know the difference. Tested Hammerite against 'caliper paint' on my front OEM front calipers, the side with Hammerite still looks fine, the side with caliper paint is long since rust coloured.
On smooth calipers I'd recommend spraying it for the best finish - Seems to take a hell of a lot of coats though.
#17
Posted 25 January 2012 - 22:23
#18
Posted 26 January 2012 - 00:24
I know Hammerite is good on Calipers, as mine were done with the Hammerite spray, and they havent discoloured at all, and they've been very hot
-----------------------------------------------------------
I will not make any deals with you. I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered. My life is my own
-----------------------------------------------------------
If you've been affected by this, or any of the issues raised in this post/topic you can contact our helpline on: 0800 382 5633 (calls charged @ £25 per min, t&c apply)
#19
Posted 26 January 2012 - 19:24
#20
Posted 27 January 2012 - 11:51

VOC C30 Register Keeper
www.polestar.se
C30 R-Design T5 - Previous Cars - MY10.5 C30 R-Design - S80 T6 - C30 R-Design MY09 - S80 T6 - S90 3.0 24v - 760 Turbo Intercooler & V6
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users


