Sign in to follow this  
Followers 0
T5ABC

320mm brake conversion, P2 plus rears

8 posts in this topic

Hi chaps, I'm swapping to XC90 336mm fronts and XC90 rear brakes within the month. So my existing 320mm setup will be up for grabs (I'll throw in the standard rear callipers too if the buyer wants them). This is for the callipers and carriers as removed, the discs have minimal life left and will go for scrap.

Removed from a 2.4T5 with 79k on the clock, very good condition. Will be available in around 4 weeks. £150 posted, or welcome to collect as they're rather heavy!

T5bobbo likes this

Share this post


Link to post
Share on other sites

Hi

Would these take much work to fit a 2002 V70 D5?

Cheers

Share this post


Link to post
Share on other sites

No, just drilling out the hub holes to 14mm. But unfortunately sold now.

Share this post


Link to post
Share on other sites

Are the xc90 rears a direct bolt on for a P2?

Share this post


Link to post
Share on other sites
4 hours ago, tingy said:

Are the xc90 rears a direct bolt on for a P2?

Yep! Tim did mine last week. Same hoses, just need standard XC90 discs and callipers..which are all the same. 302 vented i think.

Share this post


Link to post
Share on other sites

Yea i have them on the 850 good upgrade for a standard rear setup and a fair bit easier on a P2

T5ABC likes this

Share this post


Link to post
Share on other sites

My car has the 316mm rotors. I thought that only the police cars have the 320mm rotors. Are the calipers different between these two? 

Edited by Ric@rdo

Share this post


Link to post
Share on other sites

Not sure. Sure the 316/320 callipers are the same.

Share this post


Link to post
Share on other sites
Sign in to follow this  
Followers 0